Lambda sensor - r.r.
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Emission control system › Lambda sensor - r.r.
‹ Prev Flexible pipe for particle filter differential pressure sensor - r.r.Next › Front lambda sensor to with catalytic converter - r.r
EngineLambda sensor - r.r.
LAMBDA SENSOR - R.R.
Removing
- Position the vehicle on a lift.
- Disconnect the negative battery terminal.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
1. Disconnect the electrical connection for the Lambda sensor.
| Description | Connector | |
|---|---|---|
| 1 | Lambda sensor | See K040 LAMBDA SENSOR |
2. Undo and remove the Lambda sensor.
Refitting
- Position the Lambda sensor in its housing and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Lambda sensor | M18 | 4.1 ÷ 5.0 | 1.9 Multijet |
- Connect the electrical connection for the Lambda sensor.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
- Connect the negative battery terminal.
- Remove the vehicle from the lift.
‹ Prev Flexible pipe for particle filter differential pressure sensor - r.r.Next › Front lambda sensor to with catalytic converter - r.r
Parts & tools for this job For 2005 Fiat Grande Punto
- PARTOxygen sensorSearch: Fiat Grande Punto 2005 oxygen sensor
- TOOLOxygen sensor socketSearch: oxygen sensor socket
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.