Inlet manifold - r + r and replace seal

Make

Fiat

Model

Grande Punto Factory Service Manual

Year

2005–2012

Section

Inlet and exhaust manifolds › Inlet manifold - r + r and replace seal

EngineInlet manifold - r + r and replace seal

INLET MANIFOLD - R + R AND REPLACE SEAL

Operation 1072B10 · INLET MANIFOLDS

1.9 Multijet

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1060E30 PRESSURE PUMP DRIVE PULLEY - R.R.

Op. 1060E10 DIESEL INJECTION PRESSURE PUMP - R.R.

Op. 1060E40 PRESSURE PUMP SUPPORT - R.R.

1. Undo the nuts (1a) and remove the intake manifold (1b).

- Remove the gasket.

Refitting

- Place the gasket back in its housing.

- Replace the intake manifold in its housing and secure it by tightening the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Intake manifold	Nut	M8	2.3 ÷ 2.8	1.2 8v 1.4 8v 1.9 Multijet

Op. 1060E40 PRESSURE PUMP SUPPORT - R.R.

Op. 1060E10 DIESEL INJECTION PRESSURE PUMP - R.R.

Op. 1060E30 PRESSURE PUMP DRIVE PULLEY - R.R.

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 1016A10 SOUND-PROOFING COVER - R.R

08 Engine