Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)08 · Engine
08 · Engine

Pressure pump drive pulley - r.r.

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Diesel injection system › Pressure pump drive pulley - r.r.
EnginePressure pump drive pulley - r.r.

PRESSURE PUMP DRIVE PULLEY - R.R.

Operation 1060E30 · DIESEL PRESSURE PUMP AND CONTROL

1.9 Multijet

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

1. Lock the rotation of the pressure pump drive pulley using two bolts.

2. Undo the pressure pump drive pulley nut.

- Undo the two bolts for locking the rotation of the pressure pump drive pulley fitted previously.

PRESSURE PUMP DRIVE PULLEY - R.R.

1. Remove the pressure pump drive pulley (1a) using the tool (1b).

ToolDescriptionFunctionValidity
1860854002ExtractorPressure pump control pulley removal1.9 Multijet

- Remove the key.

PRESSURE PUMP DRIVE PULLEY - R.R.

Refitting

- Place the key back in its housing.

- Place the pressure pump drive pulley back in its housing.

- Lock the rotation of the pressure pump drive pulley using two bolts.

- Tighten the nut fixing the pressure pump drive pulley to the recommended torque.

ComponentFasteningdiaValue (daNm)Validity
Pressure pump drive pulleyNutM144.5 ÷ 5.51.9 Multijet

- Undo the two bolts for locking the rotation of the pressure pump drive pulley fitted previously.

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 1016A10 SOUND-PROOFING COVER - R.R

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.