AIR FLOW METER - R.R.

Operation 1060G10 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

1.9 Multijet

Removing

If the air flow meter is being replaced, when the refitting is complete, the following operations must be carried out using the Examiner.

- Disconnect the negative battery terminal.

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Disconnect the electrical connection from the flow meter.

2. Loosen the band fixing the flow meter to the air filter.

3. Loosen the band and disconnect the hose from the flow meter.

4. Remove the flow meter from the air filter.

Refitting

- Fit the flow meter on the air filter and secure it using the band.

- Connect the hose to the flow meter and fasten the band.

- Connect the electrical connection to the flow meter.

Op. 1016A10 SOUND-PROOFING COVER - R.R

- Connect the negative battery terminal.

1.3 Multijet

Removing

If the air flow meter is being replaced, when the refitting is complete, the following operations must be carried out using the Examiner.

- Disconnect the negative battery terminal.

1. Disconnect the electrical connection for the air flow meter.

2. Loosen the collar and disconnect the air intake sleeve to the turbocharger, air flow meter side.

3. Undo the bolts (3a) and remove the air flow meter (3b).

Refitting

- Place the air flow meter back in its housing and secure it using the bolts.

- Connect the air intake hose to the turbocharger, air flow meter side, and tighten the band.

- Connect the electrical connection to the air flow meter.

- Connect the negative battery terminal.