DIESEL ELECTRONIC INJECTION CONTROL UNIT - .R

Operation 1060G80 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

1.9 Multijet

Removing

If the diesel electronic injection system control unit is being replaced, when the refitting is complete the following operations must be carried out using the Examiner.

Only for versions with DPF, if the diesel electronic injection system control unit is being replaced, the engine oil must be changed.

Op. 1016A10 SOUND-PROOFING COVER - R.R

- Disconnect the negative battery terminal.

1. Disconnect electrical connections (1a), unscrew nuts (1b) and remove control unit (1c).

Refitting

- Refit the control unit in its seat, secure with nuts and connect the electrical connections.

- Connect the negative battery terminal.

Op. 1016A10 SOUND-PROOFING COVER - R.R

1.3 Multijet

Removing

If the diesel electronic injection system control unit is being replaced, when the refitting is complete the following operations must be carried out using the Examiner.

For the 90 CV versions with DPF only, if the diesel electronic injection system control unit is being replaced, the engine oil must be changed.

- Disconnect the negative battery terminal.

1. Disconnect the electrical connections for the injection control unit.

2. Undo the nuts and remove the injection control unit.

Refitting

- Place the injection control unit in position and secure it using the nuts.

- Connect the electrical connections for the injection control unit.

- Connect the negative battery terminal.