PRESSURE RELIEF SENSOR - R.R.

Operation 1060G16 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

1.9 Multijet

Removing

- Disconnect the negative battery terminal.

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Disconnect the electrical connection for the pressure relief sensor.

2. Undo bolts (2a) and remove the pressure relief sensor (2b).

Refitting

- Position the pressure relief sensor in its housing and secure it using the bolt.

- Connect the electrical connection for the pressure relief sensor.

Op. 1016A10 SOUND-PROOFING COVER - R.R

- Connect the negative battery terminal.

1.3 Multijet

Removing

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

1. Release the electrical wiring (1a) from the band (1b) and move it to the side.

2. Disconnect the electrical connection for the pressure relief sensor.

3. Undo the bolt (3a) and remove the excess pressure sensor (3b).

Refitting

- Position the excess pressure sensor in its housing and secure it using the bolt.

- Connect the electrical connection for the pressure relief sensor.

- Place the electrical wiring in position and fasten it with the band.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.