Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Idea Factory Service Manual (2003-2012)18 · Body panels and frame
18 · Body & interior

R.r. rear bumper

Make
Fiat
Model
Idea Factory Service Manual
Year
2003–2012
Section
Removing refitting › R.r. rear bumper
Body panels and frameR.r. rear bumper

R.R. REAR BUMPER

Operation 7210E66 · External parts

Removing

- 5540A44 l/h or r/h tail light (one) - r+r (right and left)

- 4450B06 left rear wheel r r

- 7055B44 left hand rear supplementary wheel arch - r+r

- 4450B08 right rear wheel r r

- 7055B45 right hand rear supplementary wheel arch - r+r

- 5580H36 parking sensor system rear sensor (1), lh or rh - r r (all)

1. Working through the two rear wheel compartments, unscrew bolts (1a) securing the upper edges of bumper (1b).

R.R. REAR BUMPER

Lower the vehicle.

1. Unscrew the upper bolts.

2. Remove the bumper.

R.R. REAR BUMPER

Refitting

Check that the bumper is undamaged.

Position the bumpers in place and tighten the upper bolts.

Raise the car and tighten the bolts securing the upper edges.

- 5580H36 parking sensor system rear sensor (1), lh or rh - r r (all)

- 7055B45 right hand rear supplementary wheel arch - r+r

- 4450B08 right rear wheel r r

- 7055B44 left hand rear supplementary wheel arch - r+r

- 4450B06 left rear wheel r r

- 5540A44 l/h or r/h tail light (one) - r+r (right and left)

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.