Thermostat unit - r+r

Operation 1088C30 · Water pump and thermostat

1.4 16v

Removing

Proceed with removal - 1048A32 sleeve from air cleaner to intake manifold - r + r

1. Loosen band and disconnect the upper coolant inlet hose to the radiator, thermostat side.

Recover the coolant which comes out in a suitable container.

2. Undo the bolts (2a) and remove the thermostat assembly (2b).

Refitting

1. Place the thermostat assembly (1a) back in its housing and secure it tightening the bolts (1b) to the recommended torque.

2. Connect the upper coolant inlet hose to the radiator, thermostat side, and tighten the band.

Proceed with refitting - 1048A32 sleeve from air cleaner to intake manifold - r + r.

Refill the engine cooling system with coolant - 0010T20 coolant change.