Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Idea Factory Service Manual (2003-2012)08 · Engine
08 · Engine

Water pump - r + r with drive belt removed

Make
Fiat
Model
Idea Factory Service Manual
Year
2003–2012
Section
Engine cooling › Water pump - r + r with drive belt removed
EngineWater pump - r + r with drive belt removed

Water pump - r + r with drive belt removed

Operation 1088C14 · Water pump and thermostat

1.4 16v

Removing

1. Loosen the band and disconnect the lower radiator coolant outlet hose from the radiator, radiator side.

Recover the coolant using a suitable container.

Water pump - r + r with drive belt removed

1. Undo the bolts (1a) and remove the water pump (1b).

Water pump - r + r with drive belt removed

Refitting

1. Place the water pump (1a) back in its housing and secure it tightening the bolts (1b) to the recommended torque.

FasteningComponentØ

Value

(daNm)

1bFront plug.TAPERED PLUGM20(Camshaft housing side) 3.2 ÷ 4.8
Water pump - r + r with drive belt removed

Connect the lower coolant outlet hose from the radiator, radiator side, and tighten the band.

Refill the engine cooling system with coolant - 0010T20 coolant change.

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.