Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Idea Factory Service Manual (2003-2012)08 · Engine
08 · Engine

Water pump - r + r

Make
Fiat
Model
Idea Factory Service Manual
Year
2003–2012
Section
Engine cooling › Water pump - r + r
EngineWater pump - r + r

Water pump - r + r

Operation 1088C10 · Water pump and thermostat

1.4 16v

Removing

Proceed with removal - 1048A10 air cleaner filtering element - replace

Proceed with removal - 7055A43 central front grille - r r

Proceed with removal - 4450B04 right front wheel r r

Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R.

Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R.

Proceed with removal - 1092B40 air conditioner compressor/alternator drive belt - r + r

Proceed with the removal.

Proceed with removal - 1056B60 single fuel manifold pipe, with injectors - r + r

Proceed with removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement

Proceed with removal - 1088C14 water pump - r + r with drive belt removed

1.3 JTD 16v

Removing

Position the vehicle on the ramp

1. Loosen the band and disconnect the lower radiator coolant outlet hose from the radiator, radiator side.

Collect the engine coolant in a suitable container.

Water pump - r + r

1.4 16v

Refitting

Proceed with refitting - 1088C14 water pump - r + r with drive belt removed.

Proceed with refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with refitting - 1056B60 single fuel manifold pipe, with injectors - r + r.

Proceed with the refitting.

Proceed with refitting - 1092B40 air conditioner compressor/alternator drive belt - r + r.

Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with refitting - 4450B04 right front wheel r r.

Proceed with refitting - 7055A43 central front grille - r r.

Proceed with refitting - 1048A10 air cleaner filtering element - replace.

Refill the engine cooling system with coolant - 0010T20 coolant change.

1.3 JTD 16v

Proceed with removal - 4450B04 right front wheel r r

Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R.

Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R.

Proceed with removal - 1092G10 single engine belt r r

1. Undo the bolts (1a) and remove the water pump (1b) complete with gasket.

Water pump - r + r

Refitting

1. Place the water pump (1a), complete with gasket, back in its housing and secure it tightening the bolts (1b) to the recommended torque.

FasteningComponentØ

Value

(daNm)

1bNutCOOLANT PUMPM6(Upper engine crankcase side) 0.8 ÷ 1.0
Water pump - r + r

Proceed with refitting - 1092G10 single engine belt r r.

Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with refitting - 4450B04 right front wheel r r.

Connect the lower coolant outlet hose from the radiator, radiator side, and tighten the band.

Refill the engine cooling system with coolant - 0010T20 coolant change.

Remove the car from the ramps.

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.