Refitting

(Cont. Op. 1056A14)

2. Take out the oil vapours intake pipe.

1. Disconnect the idle adjustment actuator electrical connection

2. Electrically disconnect the intake air temperature sensor

3. Disconnect the throttle position sensor electrical connection

4. Electrically disconnect the single injector (SPI)

1. Unscrew the throttle case cover screws.
2. Remove the throttle case.

Never remove the shaft or the throttle from their seats.
Never tamper with the throttle valve stick proof screw.
Where necessary, replace the entire throttle case.

The throttle case and the components are never to be immersed in any type of washing liquid. Overall cleaning is to be carried out with compressed air and a brush.

Refitting

• Install the throttle case.
• Tighten the throttle case fastening screws to the correct torque

(Cont.)