Refitting
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Petrol injection fuel supply (1108) › Refitting
10 EngineRefitting
(Cont. Op. 1056A46)
Refitting
- Assemble the intake air temperature sensor in the throttle case cover.
- Screw the intake air temperature sensor fastening screws.
- Complete with Op. 1056A30 THROTTLE CASE COVER - REPLACE.
- Complete with Op. 1048A10 COMPLETE AIR CLEANER - R+R.
- Connect the negative (-) battery terminal
| Name | Connector | |
|---|---|---|
| - | Battery | A1 |
- Remove the body protection cover.
- Close the engine compartment.
1056A50 - ENGINE WATER TEMPERATURE SENSOR - R+R
Removal
- Position the vehicle on a hoist.
- Open the engine compartment.
- Assemble the body protection covers.
- Disconnect the negative (-) battery terminal.
| Name | Connector | |
|---|---|---|
| - | Battery | A1 |
- Raise the vehicle.
- Unscrew the engine compartment protection screws.
- Remove the engine compartment protection.
- Disconnect the engine coolant lower outlet sleeve from the radiator, drain part of the coolant into a suitable container and reconnect the sleeve.
- Assemble the engine compartment protection and fasten with its screws.
- Lower the vehicle.
- Follow Op. 1048A10 COMPLETE AIR CLEANER - R.R.
- Disconnect the engine temperature sensor electrical connection
| Name | Connector | |
|---|---|---|
| 1 | Engine temperature sensor | K45 |
- Unscrew the sensor and remove it.
(Cont.)
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.