10 Engine Refitting · page 1 of 2
(Cont. Op. 1056A92)
Electrically disconnect the air conditioner compressor enable solenoid
Name Connector 1 Air conditioner compressor enable solenoid L20
Disconnect the starter motor electrical connection
Name Connector - Starter motor A20
Electrically disconnect the alternator
Name Connector - Alternator A10
Disconnect the fuel vapours recovery solenoid valve electrical connection (see Op. 1080E28 Fuel vapour passage ENABLE SOLENOID VALVE to intake - R.R.).
Name Connector - Fuel vapours recovery solenoid valve L10
Remove the injection system wiring bundle. Refitting
Fit the injection system wiring bundle back in place Electrically connect the engine control unit
Name Connector - Engine control unit M10
Restore the electrical connection to the injection multiple relay
Name Connector - Injection multiple relay J70
Connect the injection control unit earth connection and fasten with its nut
Name Connector - Injection control unit earth C60
Connect the absolute pressure sensor electrical connection
Name Connector - Absolute pressure sensor K48
Connect the injection services power supply fuse
Name Connector - Injection services power supply fuse B40
Electrically connect the front/engine connection
Name Connector - Front/engine connection D4
Electrically connect the lambda sensor
Name Connector - Lambda sensor K40
Electrically connect the reversing lights switch
Name Connector - Reversing lights switch I20
Connect the engine temperature sensor electrical connection
Name Connector - Engine temperature sensor K45
Connect the earth on the engine and fasten with its nut
Name Connector - Earth on engine C40
(Cont.)
02 Engine
