10 EnginePetrol inject · page 2 of 3
(Cont. Op. 1056A92)
- Connect the injection control unit relay electrical connection
| Name | Connector |
|---|
| Injection control unit relay | J11 |
- Connect the injection services power supply fuse
| Name | Connector |
|---|
| Injection services power supply fuse | B40 |
- Connect the main injection relay electrical connection
| Name | Connector |
|---|
| Main injection relay | J10 |
- Connect the absolute pressure sensor electrical connection
| Name | Connector |
|---|
| Absolute pressure sensor | K48 |
- Electrically connect the front/engine connection
| Name | Connector |
|---|
| Front / engine connection | D4 |
- Electrically connect the lambda sensor
| Name | Connector |
|---|
| Lambda sensor | K40 |
- Electrically connect the rev sensor
| Name | Connector |
|---|
| Rev sensor | K46 |
- Connect the idle actuator electrical connection
| Name | Connector |
|---|
| Idle actuator | N74 |
- Restore the electrical connection of the air temperature sensor
| Name | Connector |
|---|
| Air temperature sensor | K42 |
- Connect the throttle position sensor electrical connection
| Name | Connector |
|---|
| Throttle position sensor | K56 |
- Electrically connect the single-injector (SPI)
| Name | Connector |
|---|
| Single-injector (SPI) | N71 |
- Connect the electrical connection of the engine temperature sensor
| Name | Connector |
|---|
| Engine temperature sensor | K45 |
- Connect the earth cable on the engine
| Name | Connector |
|---|
| Earth on engine | C40 |
- Connect the ignition coils electrical connections
| Name | Connector |
|---|
| Ignition coil N° 1 (cyl. 1-4) | A30 |
| Ignition coil N° 2 (cyl. 2-3) | A30 |
- Connect the fuel vapours recovery solenoid valve electrical connection (see Op. 1080E28 FUEL VAPOUR PASSAGE ENABLE SOLENOID VALVE to intake - R+R).
| Name | Connector |
|---|
| Fuel vapours recovery solenoid valve | L10 |
- Insert the injection system wiring bundle in the fastening strap.
- Refit the air cleaner cover with the pipes and throttle case air conveyor.
- Insert the oil vapours recovery pipe onto the throttle case.
- Insert the oil vapours recovery pipe onto the tappet cover.
(Cont.)
02 Engine
