Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting (page 2 of 2)

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Petrol injection fuel supply (899)
10 EngineRefitting · page 2 of 2

(Cont. Op. 1056A50)

  1. Remove the engine compartment protection.
Diagram showing the removal of the engine compartment protection, with callout numbers 1 and 2 indicating screws and a panel section.
  1. Disconnect the engine coolant lower outlet sleeve from the radiator, drain part of the coolant into a suitable container and reconnect the sleeve.
Diagram showing the engine coolant lower outlet sleeve connection to the radiator, with callout number 1 pointing to the sleeve.
  • Assemble the engine compartment protection and fasten with its screws.
  • Lower the vehicle.
  1. Release the air cleaner cover clasps.
  2. Unscrew the throttle case air conveyor screws.
  3. Take out the oil vapours recovery pipe from the tappet cover.
  4. Take out the oil vapours recovery pipe from the throttle case.
Diagram showing the removal of the air cleaner cover, with callout numbers 1, 3, and 4 indicating the cover, sensor, and pipes.
  1. Remove the air cleaner cover with its pipes and throttle case air conveyor.
Diagram showing the disconnected engine temperature sensor electrical connector.
  1. Disconnect the engine temperature sensor electrical connection
NameConnector
1Engine temperature sensorK45
  1. Unscrew the sensor and remove it.
Diagram showing the engine temperature sensor being unscrewed, with callout numbers 1 and 2 indicating the connector and sensor.

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.