B02 The starter motor does not work
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Starting › B02 The starter motor does not work
DiagnosisB02 The starter motor does not work
B02 The starter motor does not work
When the ignition key is turned to MAR the instruments light up but the starter motor does not run.
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 1 | CHECK STARTER MOTOR CONNECTIONS – Check connections between battery, alternator and starter motor. (Wiring diagram: E5010 "STARTING AND RECHARGING") |
All OK Go to Step 2 |
Problems found Incorrect connections |
Intervention Restore connections |
|
| 2 | CHECK STARTER MOTOR Check starter motor intactness and correct operation. |
All OK Go to Step 3 |
Problems found Starter motor fault. |
Intervention Overhaul the starter motor OP. PROCEDURE 5520B14 and, if required, change it OP. PROCEDURE 5520B10 (versions with climate control OP. PROCEDURE 5520B12) |
|
| 3 | CHECK CORRECT OPERATION Check the fault is no longer present |
All OK End of test |
Problems found – |
Intervention – |
|
Parts & tools for this job For 1998 Fiat Seicento
- TOOLBattery testerSearch: car battery tester
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBattery terminal cleanerSearch: battery terminal cleaner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.