Clutch pedal - r r for rhd versions

Operation 3330B27 · Pedal unit

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

- 1068A21 ACCELERATOR PEDAL with built in POTENTIOMETER - R.R. on right hand drive versions

1. Working from inside the car, undo clips (1a) to release detent (1b) and disconnect rod (1c) from the clutch pedal.

2. Prise up pedal return spring (2a) from its seat (2b) on the pedal mount.

3. Unscrwe the pedal retaining pin and withdraw to release the clutch pedal.

4. Remove the clutch pedal.

Refitting

Position the clutch pedal.

Connect the clutch pedal pushrod.

Insert the pedal retaining pin and tighten the nut.

Insert the pin into its seat on the pedal mount.

Fit the device retaining the master cylinder pushrod to the retaining device on the pedal onto the pedal.

- 1068A21 ACCELERATOR PEDAL with built in POTENTIOMETER - R.R. on right hand drive versions

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.