Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Stilo Factory Service Manual (2001-2007)08 · Engine
08 · Engine

Cold air intake - r r

Make
Fiat
Model
Stilo Factory Service Manual
Year
2001–2007
Section
Engine air supply circuit › Cold air intake - r r
EngineCold air intake - r r

Cold air intake - r r

Operation 1048A23 · Vacuum air circuit

1.2 16v

Removing

- 1048A10 air cleaner filtering element - replace

1. Release the retaining tabs (1a) from slots (1b), then remove air inlet sleeve (1c) from the air cleaner housing.

Cold air intake - r r

1.4 16v

Removing

- 1048A10 air cleaner filtering element - replace

1. Release the retaining tabs (1a) from slots (1b), then remove air inlet sleeve (1c) from the air cleaner housing.

Cold air intake - r r

1.8 16v

Removing

- 1016A40 ignition coil cover on cylinder head- r+r

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 1048A28 vacuum air circuit resonator pipe - r+r

1. Release the hose at both ends and remove it.

Cold air intake - r r

2.4 20v

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

1. Release the cold air intake (1a) from the connector on the front end (1b) and from the air cleaner (1c), then remove it.

Cold air intake - r r

1.9 JTD 8v

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

1. Release the cold air intake (1a) from the connector on the fan (1b) and air cleaner (1c), then remove.

Cold air intake - r r

1.2 16v

Refitting

Fit the air inlet sleeve to the filter until both retaining tabs on the sleeve fit into the holes on the filter case.

- 1048A10 air cleaner filtering element - replace

1.4 16v

Refitting

Fit the air inlet sleeve to the filter until both retaining tabs on the sleeve fit into the holes on the filter case.

- 1048A10 air cleaner filtering element - replace

1.8 16v

Refitting

Fit the hose in position.

- 1048A28 vacuum air circuit resonator pipe - r+r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 1016A40 ignition coil cover on cylinder head- r+r

2.4 20v

Refitting

Fit the cold air intake.

Fit the pipe to the connector on the front end and the air filter casing.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

1.9 JTD 8v

Refitting

Fit the cold air intake.

Fit the pipe to the fitting on the fan and air cleaner case.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Parts & tools for this job For 2001 Fiat Stilo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.