Exhaust pipe attachment to engine - r + r

Operation 1076B50 · Exhaust pipes and silencers

1.9 JTD 8v

Removing

Position the vehicle on a lift.

Raise the vehicle.

- 7055B54 under-engine guard - r r

1. Undo the nuts securing the first exhaust pipe section to the catalytic preconverter.

2. Undo the nuts securing the first exhaust pipe section to the catalytic converter.

3. Remove the first section of exhaust pipe complete with gaskets.

1.9 JTD 16v

Removing

Position the vehicle on a lift.

Raise the car.

- 7055B54 under-engine guard - r r

1. Undo the nuts securing the first exhaust pipe section to the catalytic preconverter.

2. Undo the nuts securing the first exhaust pipe section to the catalytic converter.

3. Remove the first section of exhaust pipe complete with gaskets.

1.9 JTD 8v

Refitting

Fit the exhaust pipe gasket.

Fit the front section of the exhaust pipe.

Secure the pins to the relevant rubber blocks.

Tighten the nuts securing the pipe to the flexible section.

Tighten the nuts securing the exhaust pipe to the catalytic preconverter.

- 7055B54 under-engine guard - r r

Lower the lift and remove the vehicle from the lift.

1.9 JTD 16v

Refitting

Fit the exhaust pipe gasket.

Fit the front section of the exhaust pipe.

Secure the pins to the relevant rubber blocks.

Tighten the nuts securing the exhaust pipe to the catalytic converter.

Tighten the nuts securing the exhaust pipe to the catalytic preconverter.

- 7055B54 under-engine guard - r r

Lower the lift and remove the vehicle from the lift.