Catalytic converter heat shield - r r

Operation 1076A48 · Exhaust pipe fastenings and protections

2.4 20v

Removing

Position the vehicle on the ramp.

- 1080B62 catalytic converter - r + r

1. Drill out the heat shield retaining rivets.

2. Undo the fixing bolts (2a) and remove the front fixing clips (2b).

3. Remove the catalytic converter heat shield.

1.9 JTD 8v

Removing

Position the vehicle on the ramp.

- 1076B42 CENTRE EXHAUST PIPE COMPLETE WITH: FLEXIBLE CONNECTOR - TORQUE CONVERTER AND CENTRE SILENCER -R.R.

1. Drill out the heat shield retaining rivets.

2. Undo the fixing bolts (2a) and remove the front fixing clips (2b).

3. Remove the catalytic converter heat shield.

1.9 JTD 16v

Removing

Position the vehicle on the ramp

- 1076B42 CENTRE EXHAUST PIPE COMPLETE WITH: FLEXIBLE CONNECTOR - TORQUE CONVERTER AND CENTRE SILENCER -R.R.

1. Drill out the heat shield retaining rivets.

2. Undo the fixing bolts (2a) and remove the front retaining clips (2b).

3. Remove the catalytic converter heat shield.

2.4 20v

Refitting

Place the catalytic converter heat shield back in its housing and secure it using new rivets.

Tighten the fixing bolts and fit the front clips.

- 1080B62 catalytic converter - r + r

Remove the car from the ramp.

1.9 JTD 8v

Refitting

Place the catalytic converter heat shield back in its housing and secure it using new rivets.

Tighten the fixing bolts and fit the front clips.

- 1076B42 CENTRE EXHAUST PIPE COMPLETE WITH: FLEXIBLE CONNECTOR - TORQUE CONVERTER AND CENTRE SILENCER -R.R.

Remove the car from the ramp.

1.9 JTD 16v

Refitting

Place the catalytic converter heat shield back in its housing and secure it using new rivets.

Tighten the fixing bolts and fit the front clips.

- 1076B42 CENTRE EXHAUST PIPE COMPLETE WITH: FLEXIBLE CONNECTOR - TORQUE CONVERTER AND CENTRE SILENCER -R.R.

Remove the car from the ramps.