Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Stilo Factory Service Manual (2001-2007)19 · Wiring diagrams and electrical functions
19 · Electrical

HEATED SEATS - Description

Make
Fiat
Model
Stilo Factory Service Manual
Year
2001–2007
Section
Electrically activated devices › HEATED SEATS - Description
Wiring diagrams and electrical functionsHEATED SEATS - Description

HEATED SEATS - Description

Description

The front seats may be optionally fitted with a special heating system (consisting of two heater elements located in the cushion and squab): these heat the seat to ease the discomfort of entering a cold passenger compartment in very cold weather, e.g. when the car is left outside for long periods during winter.

The heating device located in each seat consists of two resistors operated by a switch located on the outside of each seat.

Once a certain temperature is reached, the heating action is automatically cut off by a thermal contact inside the device.

An LED located in the actual switches itself indicates when the resistors are switched on.

The seat heating operates only when the ignition is switched on.

The seat heating circuit is controlled by a special relay and protected by two specific fuses located in the luggage compartment fuse box.

Electric seats

Description

The front seats may be optionally fitted with a special heating system (consisting of two heater elements located in the cushion and squab): these heat the seat to ease the discomfort of entering a cold passenger compartment in very cold weather, e.g. when the car is left outside for long periods during winter.

The heating device located in each seat consists of two resistors operated by a switch located on the outside of each seat.

The switch is an integral part of the seat movement controls See E3076 ELECTRICALLY-ADJUSTABLE SEATS.

Once a certain temperature is reached, the heating action is automatically cut off by a thermal contact inside the device.

An LED located in the actual switches indicates when the resistors are switched on.

The seat heating operates only when the ignition is switched on.

The seat heating circuit is controlled by a special relay and protected by two specific fuses, located in the luggage compartment fuse box.

Parts & tools for this job For 2001 Fiat Stilo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.