SUN ROOF - Functional description

Functional description

The services relay T13, located in the unit under the dashboard B2, supplies with the above-mentioned logic and controlled by the Body Computer M1 - pin 14 of connector F - sun-roof control motor N35 - pin 4 - and blind operation motor N34 - pin 7 - via two lines, protected by the fuses F47 and F48.

Pin 5 of N35 receives the automatic roof closure signal, in acordance with the above logic, coming from pin 10 of connector D of the Body Computer M1

Pin 3 of N35 receives the speedometer signal from pin 23 of connector H of the Body Computer M1. Pin 2 of N35 is earthed.

Pin1 of N35 supplies the switch H60, which sends the various control signals, corresponding to the various knob positions, to pins 10, 9, 12 and 11 of N35.

Switch H73 that controls the blind is supplied independently from ignition-operated line (INT) protected by fuse F49 of underfacia control unit B2;

Pin 1 of N35 supplies switch H73, which sends signals corresponding to opening and closure signals to pin 7 and 8 of N35

Pin 6 of N35 sends a control signal to motor N34 which operates the blind.

The aerial-receivier P93 sends the Body Computer M1 the signal to open/close the doors and also windows and sunroof, by connecting to pins 21 and 31 of connector B See E3040 CENTRAL LOCKING.

Passive entry

Functional description

The aerial-receivier P15 sends the Passive Entry control unit M64 the signal to open/close the doors and also windows and sunroof. The control unit sends the request to Body Computer M1See E7018 PASSIVE ENTRY via the CAN network.