300Tdi Engine Overhaul: Flywheel/Drive Plate Housing
ENGINE
OVERHAUL
53
9. Position selected shims, spacer and drive plate
to crankshaft.
NOTE: Dowel located.
10. Fit and finger tighten 8 bolts.
NOTE: Locking plate is no longer required.
11. Restrain crankshaft using tool LRT-12-080
and tighten drive plate bolts to 146 Nm.
12. Remove tool LRT-12-080 and crankshaft
pulley.
FLYWHEEL/DRIVE PLATE HOUSING
Remove
1. Remove flywheel/drive plate.
NOTE: Flywheel housing illustrated.
2. Remove 2 bolts securing top of housing to
cylinder block.
3. Remove 4 bolts securing housing to engine
mountings.
4. Progressively slacken then remove 6 bolts
securing housing to cylinder block.
5. Remove housing.