Accessories and conversions special service tools

ACCESSORIES AND CONVERSIONS SPECIAL SERVICE TOOLS

DO NOT FIT unapproved accessories or conversions, The use of approved special service tools is as they could affect the safety of the vehicle. important. They are essential if service operations are Land Rover will not accept liability for death, personal to be carried out efficiently, and safely. Where special injury, or damage to property which may occur as a tools are specified, only these tools should be used direct result of the fitting of non-approved conversions to avoid the possibility of personal injury or to the vehicle. damage to the components. Also the amount of time which they save can be considerable.

Every special tool is designed with the close co-operation of Land Rover, and no tool is put into

WHEELS AND TYRES

production which has not been tested and approved by us. New tools are only introduced where an

WARNING: DO NOT replace the road

operation cannot be satisfactorily carried out using

wheels with any type other than genuine

existing tools or standard equipment. The user is

Land Rover wheels which are designed for

therefore assured that the tool is necessary and that it

multi-purpose on and off road use and have very

will perform accurately, efficiently and safely.

important relationships with the proper operation of the suspension system and vehicle handling.

Special tools bulletins will be issued periodically giving

Replacement tyres must be of the make and sizes

details of new tools as they are introduced.

recommended for the vehicle, and all tyres must be the same make, ply rating and tread pattern.

All orders and enquiries from the United Kingdom should be sent direct to V. L. Churchill. Overseas orders should be placed with the local V. L. Churchill distributor, where one exists. Countries where there is STEAM CLEANING no distributor may order direct from: V. L. Churchill Limited, To prevent consequential rusting, any steam cleaning PO Box 3, within the engine bay MUST be followed by careful Daventry, Northants, re-waxing of the metallic components affected. England, NN11 4NF. Particular attention must be given to the steering column, engine coolant pipes, hose clips and ignition The tools recommended in this Workshop Manual are coil bracket. listed in a multi-language illustrated catalogue, obtainable from: Messers. V. L. Churchill at the above address, or from: Land Rover Publications,

SPECIFICATION

Charactor Mailing Haysham Road,

The specification details and instructions set out in

Bootle,

this Manual apply only to a range of vehicles and not

Merseyside, L70 1JL,

to any one. For the specification of a particular vehicle purchasers should consult their Dealer The Manufacturer reserve the right to vary their specifications with or without notice, and at such times and in such manner as they think fit. Major as well as COPYRIGHT minor changes may be involved in accordance with the Manufacturer’s policy of constant product ' 1996 Rover Group Limited improvement. All rights reserved. No part of this publication may be Whilst every effort is made to ensure the accuracy of produced, stored in a retrieval system or transmitted the particulars contained in this Manual, neither the in any form, electronic, mechanical, recording or other Manufacturer or Dealer, by whom this Manual is means without prior written permission of Rover supplied, shall in any circumstances be held liable for Group. any inaccuracy or the consequences thereof.