Synthetic rubber used engine oil

SYNTHETIC RUBBER USED ENGINE OIL

Many ’0’ ring seals, flexible pipes and other similar items which appear to be natural rubber are made of synthetic materials called Fluoroelastomers. Under normal operating conditions this material is safe, and skin, leading to dryness, irritation and dermatitis. does not present a health hazard. However, if the material is damaged by fire or excessive heat, it can Used engine oil contains potentially harmful break down and produce highly corrosive Hydrofluoric contaminants which may cause skin cancer. acid which can cause serious burns on contact with Adequate means of skin protection and washing skin. Should the material be in a burnt or overheated facilities should be provided. condition handle only with seamless industrial gloves. Decontaminate and dispose of the gloves immediately Handling precautions after use.

If skin contact does occur, remove any contaminated clothing immediately and obtain medical assistance without delay. In the meantime, wash the affected area with copious amounts of cold water or limewater for fifteen to sixty minutes.

RECOMMENDED SEALANTS

A number of branded products are recommended in this manual for use during maintenance and repair work. These items include: HYLOMAR GASKET AND JOINTING COMPOUND and HYLOSIL RTV SILICONE COMPOUND.

They should be available locally from garage

10. If skin disorders develop, obtain medical advice.

equipment suppliers.

11. Where practicable, degrease components prior
12. Where there is a risk of eye contact, eye

Disposing of used oils

Environmental protection precaution

It is illegal to pour used oil onto the ground, down sewers or drains, or into waterways.

Dispose of used oil through authorised waste disposal contractors. If in doubt contact your Local Authority for advice on disposal facilities.

• WARNING: Prolonged and repeated
• contact with engine or motor oil will result
• in the removal of natural fats from the

1. Avoid prolonged and repeated contact with oils, particularly used engine oils.
2. Wear protective clothing, including impervious gloves where applicable.
3. Do not put oily rags in pockets.
4. Avoid contaminating clothes, particularly underwear, with oil.
5. Overalls must be cleaned regularly. Discard unwashable clothing and oil impregnated footwear.
6. First aid treatment must be obtained immediately for open cuts and wounds.
7. Use barrier creams, before each work period, to help the removal of oil from the skin.
8. Wash with soap and water to ensure all oil is removed (skin cleansers and nail brushes will help). Preparations containing lanolin replace the natural skin oils which have been removed.
9. Do not use gasoline, kerosene, diesel fuel, petrol, thinners or solvents for washing the skin.

to handling.

protection should be worn, for example, goggles or face shields; in addition an eye wash facility should be provided.