Location of identification numbers
- Make
- Land Rover
- Model
- Defender 90 Workshop Manual (NAS)
- Section
- Information › Location of identification numbers
IntroductionLocation of identification numbers
LOCATION OF IDENTIFICATION NUMBERS
Engine serial number - V8i engine
Stamped on a cast pad on the cylinder block, between numbers 3 and 5 cylinders.
- NOTE: The appropriate engine
- compression ratio is stamped above the
- serial number.
Front axle serial number
Serial number is stamped on the front of LH axle tube.
Automatic gearbox serial number
The serial number is stamped on a plate attached to the LH side of the casing.
Transfer gearbox serial number
The serial number is stamped on the LH side of the gearbox casing below the mainshaft rear bearing Rear axle serial number housing adjacent to the bottom cover, see J6092 Serial number is stamped on rear of LH axle tube.
Parts & tools for this job For Land Rover Defender
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Land Rover Defender
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.