300Tdi Defender
19
FUEL SYSTEM
18
REPAIR
EGR THROTTLE POSITION SENSOR
Service repair no - 17.45.08
Remove
1. Remove 2 screws securing throttle position
sensor mounting plate to injection pump.
2. Disconnect sensor multi-plug.
3. Remove sensor assembly.
Refit
4. Position sensor assembly on injection pump and
secure with screws.
5. Connect multi-plug.
6. Adjust sensor
See Adjustment, EGR throttle
sensor
EGR CONTROL UNIT
Service repair no - 17.45.07
Remove
1. Raise centre seat, or cubby box
See CHASSIS
AND BODY, Repair, Cubby box to gain access
to EGR control unit harness.
2. Disconnect control unit multi-plug and remove
centre seat or cubby box.
3. Remove 4 screws and detach control unit from
seat or cubby box base.
Refit
4. Secure EGR control unit to base of centre seat
or cubby box.
5. Position centre seat or cubby box and connect
control unit multi-plug.
6. Fit centre seat, or cubby box.
See CHASSIS
AND BODY, Repair, Cubby box