Discovery II
MANUAL GEARBOX - R380
REPAIRS
37-17
14. Remove handbrake drum retaining screw and
remove handbrake drum.
15. Remove 4 bolts from handbrake back plate,
release back plate and tie aside.
16. Remove 2 bolts securing clutch slave cylinder,
collect heat shield, release slave cylinder and
position aside.
17. Fit support plate LRT-99-007 to gearbox jack.
18. Position gearbox jack and support plate to
gearbox and secure with 3 bolts.
19. Support the weight of gearbox, remove nuts
securing gearbox mountings to body.
20. Remove 4 bolts securing both mountings to
gearbox, raise gearbox and remove both
mountings.
21. Lower gearbox sufficiently to access top of
gearbox.