Discovery II
SCREENS
76-4-2
REPAIRS
Windscreen
$% 76.81.01
Introduction
The following equipment is required:
l
Cutting wire and handles.
l
Kent cutting knife.
l
Glazing knife.
l
Windscreen repair kit.
l
Sealant applicator gun.
l
Suction cups.
l
A felt covered table or stand to support glass.
WARNING: Wear protective gloves when
handling glass, solvents and primers.
WARNING: Wear suitable eye protection when
removing and refitting glass.
WARNING: If glass has splintered, protect eyes
and operate demister blower to remove glass
from heater ducts. Use a vacuum cleaner to
remove glass from fascia, carpet and seats.
Remove
1. Remove air intake plenum.
2. If fitted, disconnect screen heater multiplugs.
3. Remove top corner trim finishers from body.
4. Remove windscreen top finisher and discard.
5. Release interior mirror from slug and tie aside.
6. Fit protection to exterior body work adjacent to
screen.
7. Cover body panels adjacent to glass.
8. Cover heater ducts with masking tape.
9. Cover interior of vehicle with protective sheet.