Fault lamp indications and default strategies (Brakes)
- Make
- Land Rover
- Model
- Freelander Workshop Manual
- Year
- 1998–2000
- Section
- Description and operation › Fault lamp indications and default strategies
BrakesFault lamp indications and default strategies
Fault lamp indications and default strategies
| Fault | Status of Warning Lamps | Default Strategy | |||
|---|---|---|---|---|---|
| ABS | ETC | HDC Fault | HDC Information | ||
| ABS ECU internal failure | On | On | On | Off | ABS: Disabled. ETC: Disabled. HDC: Disabled. |
| Shuttle valve switch | On | On | On | Off | ABS: Deceleration threshold increased, return pump activated if sum of output valve actuation on one axle exceeds 120 milliseconds. ETC: Disabled. HDC: Disabled. |
| ECM input failure | Off | On | On | Off * | ABS: Enabled. ETC: Disabled. HDC: Immediately disabled if not in active braking mode, faded out then disabled if in active braking mode. |
| Sticking throttle | Off | Off | On | Off * | ABS: Enabled. ETC: Enabled. HDC: Immediately disabled if not in active braking mode, faded out then disabled if in active braking mode. |
| Implausible gear position input | Off | Off | On | Off * | ABS: Enabled. ETC: Enabled. HDC: Immediately disabled if not in active braking mode, faded out then disabled if in active braking mode. |
| No reference earth | On | On | On | Off | ABS: Disabled. ETC: Disabled. HDC: Disabled. |
| Failure of ABS sensor | On | On | On | Off † | ABS: Enabled. ETC: Enabled. HDC: Immediately disabled if not in active braking mode; if in active braking mode, remains enabled until braking inactive for 10 seconds, then disabled. |
Parts & tools for this job For 1998 Land Rover Freelander
- PARTReplacement bulbsSearch: Land Rover Freelander 1998 bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.