Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)25 · Heating & ventilation
25 · Heating & A/C

Switch - recirculation control

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Repairs › Switch - recirculation control
Heating & ventilationSwitch - recirculation control

SWITCH - RECIRCULATION CONTROL

Service repair no - 80.10.21

Remove

  1. Remove radio. See ELECTRICAL, Repairs.
Switch - recirculation control – Remove radio. See ELECTRICAL, Repairs.
  1. Remove heater control knobs.
  2. Remove 2 screws and remove heater control face plate.
Switch - recirculation control – Remove 2 screws and remove heater control face plate.
  1. Disconnect multiplug from switch.
  2. Remove switch from heater control mounting.

Refit

  1. Fit switch and connect multiplug.
  2. Fit heater control face plate and tighten screws.
  3. Fit heater control knobs.
  4. Fit radio. See ELECTRICAL, Repairs.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.