LR3/Disco 3
Installation
17 .
Using a transmission jack, support the differential.
18 .
CAUTION: Before disconnecting or removing the components, ensure the area around the
joint faces and connections are clean. Plug open connections to prevent contamination.
Remove the rear differential.
Remove the 3 bolts.
Disconnect the breather line.
1 .
Install the rear differential.
Connect the breather line.
Tighten the front mounting bolt to 275 Nm (203 lb.ft).
Tighten the rear mounting bolts to 175 Nm (129 lb.ft).
2 .