LR3/Disco 3
10 .
CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the
premature failure of the joint.
Connect the lower arm to the wheel knuckle.
Tighten to 275 Nm (203 lb.ft).
11 .
Install a new halfshaft retaining nut and lightly tighten.
12 .
Connect the toe link.
Tighten the bolt to 175 Nm (129 lb.ft).
13 .
Secure the parking brake cable to the lower arm.
14 .
Install the stabilizer bar link.
Tighten the nuts to 115 Nm (85 lb.ft).
15 .
Tighten the halfshaft retaining nut to 350 Nm (258 lb.ft).
Stake the nut to the halfshaft.
16 .
Install the RH halfshaft. For additional information, refer to
Halfshaft (47.11.01)
(Section 205-05)
17 .
Install the wheels and tires.
Tighten the wheel nuts to 140 Nm (103 lb.ft).