Range Rover P38
TRANSFER BOX
3
REPAIR
OUTPUT SHAFT OIL SEAL - FRONT
Service repair no - 41.20.51
Remove
1. Remove chassis cross member.
See CHASSIS
AND BODY, Repair.
2. Mark propeller shaft and transfer gearbox
flanges to aid assembly.
3. Remove 4 nuts and bolts securing propeller
shaft flange. Tie shaft aside.
4. Use LRT-51-003 to restrain transfer box drive
flange. Remove nut and discard. Collect washer.
5. Using LRT-99-500 if necessary, withdraw flange
from transfer box. Collect sealing washer.
6. Lever seal from location in transfer box.