Range Rover P38 Rear Suspension Repair- Electronic Air Suspension Bump Stop
64
REAR SUSPENSION
NEW RANGE ROVER
2
REPAIR
CAUTION: When refitting the air spring,
DO NOT allow the vehicle to rest on the
deflated air spring.
The chassis must be supported until the air spring
is inflated.
Refit
8. Clean mating faces of axle, chassis and air
spring.
9. Fit air spring, remove seal from spring and air
pipe. Connect pipe to spring.
10. Align spring to chassis, with assistance fit
securing clip.
CAUTION: Ensure air hose is correctly
routed.
11. Remove support from chassis, lower spring onto
axle and refit support.
12. Fit clip to secure spring to axle.
13. Carry out leak test.
See FRONT SUSPENSION,
Repair.
BUMP STOP
Service repair no - 64.30.15
Remove
1. Raise the vehicle.
WARNING: Support on safety stands.
2. Remove bump stop from body.
Refit
3. Fit bump stop.
4. Remove safety stands. Lower vehicle.