Range Rover P38
75
SUPPLEMENTARY RESTRAINT SYSTEM
NEW RANGE ROVER
14
PRECAUTIONS
WARNING: Ensure tool SMD 4082/1 is not
connected to battery.
4. Connect flylead SMD 4082/5 to harness
connector.
5. Connect flylead SMD 4082/5 to tool SMD
4082/1.
WARNING: Ensure airbag module is
secure within fascia.
6. Connect tool SMD 4082/1 to battery.
WARNING: Ensure all personnel are
standing at least 15 metres away from
vehicle.
7. Press both operating buttons to deploy airbag
module.
8. DO NOT return to airbag module for 30 minutes.
9. Using gloves and face mask, remove airbag
module from fascia. Place airbag module in
plastic bag and seal bag.
See Repair.
10. Transport deployed airbag module to designated
area for incineration.
NOTE: DO NOT transport airbag module in
the vehicle passenger compartment.
11. Scrap all remaining parts of SRS system. DO
NOT re-use or salvage any parts of the SRS
system.
