Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)11 · Electrical
11 · Electrical

Generator installation note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Charging System › Generator installation note
ElectricalGenerator installation note

manifold. Make sure the generator duct is installed securely.

  1. Remove the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  2. Remove the drive belt. (See DRIVE BELT REPLACEMENT [LF] .)
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
ELECTRICAL – Charging System – figure
Fig. 5: Identifying Removal Order Of Generator (With Torque Specifications)
Courtesy of MAZDA MOTORS CORP.

GENERATOR INSTALLATION NOTE

  1. Tighten bolt A temporarily.
  2. Tighten bolt B, C to the specified tightening torque.
  3. Tighten bolt A to the specified tightening torque.

GENERATOR INSPECTION [LF]

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.