Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)09 · Restraints
09 · Body & interior

Pre-tensioner seat belt (page 2 of 3)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Air Bag System
RestraintsPre-tensioner seat belt · page 2 of 3
RESTRAINTS – Air Bag System – figure
Fig. 45: Removing Pre-Tensioner Seat Belt & Connect SST (Adapter Harness)
Courtesy of MAZDA MOTORS CORP.
  1. Install the pre-tensioner seat belt.
  2. Connect the SST (Deployment tool) to the SST (Adapter harness).
  3. Connect the SST (Deployment tool) to the battery. Connect the power supply red clip to the positive battery terminal, and the black clip to the negative battery terminal.
  4. Verify that the red lamp on the SST (Deployment tool) is illuminated.
  5. Verify that all persons are standing at least 6 m {20 ft} away from the vehicle.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.