Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)09 · Restraints
09 · Body & interior

Side air bag module (page 2 of 2)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Air Bag System
RestraintsSide air bag module · page 2 of 2
  1. Connect the SST (Deployment tool) to the SST (Adapter harness).
  2. Connect the SST (Deployment tool) to the battery. Connect the power supply red clip to the positive battery terminal, and the black clip to the negative battery terminal.
  3. Verify that the red lamp on the SST (Deployment tool) is illuminated.
  4. Verify that all persons are standing at least 6 m {20 ft} away from the vehicle.
RESTRAINTS – Air Bag System – figure
Fig. 43: Connecting SST (Deployment Tool) To SST (Adapter Harness)
Courtesy of MAZDA MOTORS CORP.
  1. Press the activation switch on the SST (Deployment tool) to operate (deploy) the side air bag module.
  2. Disconnect the SSTs (Deployment tool) from the SSTs (Adapter harness).

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.