Rear bumper valance (page 2 of 2)
- Make
- MG
- Model
- MGF Body Repair Manual
- Year
- 1995–2000
- Section
- Exterior fittings
BodyRear bumper valance · page 2 of 2
- Remove 2 bolts securing bumper valance to bumper armature.
- Open boot lid and position luggage compartment carpet aside.
- Disconnect 2 number plate lamp multiplugs.
- Release 2 grommets from body.
- Remove 3 thread covers and 3 nuts securing bumper to body.
- Remove bumper taking care to release wires from holes. Do not carry out further dismantling if component is removed for access only.
Parts & tools for this job For 1995 MG MGF
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: MG touch up paint
- PARTPanel clip assortmentSearch: MG panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.