Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 General data, torque settings and capacities04 Maintenance05 Engine (K Series)06 Engine management (MEMS 3), fuel and emission systems07 Cooling system08 Manifolds and exhaust system09 Clutch10 Manual gearbox11 Automatic gearbox (Stepspeed Em-CVT)12 Drive shafts13 Steering14 Front suspension15 Rear suspension16 Brakes17 Restraint systems (SRS)18 Body19 Heating and ventilation20 Air conditioning21 Wipers and washers22 Electrical23 Instruments
MG TF Factory Workshop Manual (2002-2005)18 · Body
18 · Body & interior

Hood seals and door glass - adjust (page 2 of 2)

Make
MG
Model
TF Factory Workshop Manual
Year
2002–2005
Section
Hood
BodyHood seals and door glass - adjust · page 2 of 2
  1. Ensure window can be raised and lowered smoothly.
  2. Close door and check cheater is positioned correctly, this can be judged by the bulge made by the glass on the ’A’ post seal which should be uniform along the seal.
  3. Fit speaker. See ELECTRICAL, Repairs.
  4. Fit door trim casing See Doors.

Parts & tools for this job For 2002 MG TF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.