Mounting - front sub frame - front (page 2 of 2)
- Make
- MG
- Model
- TF Factory Workshop Manual
- Year
- 2002–2005
- Section
- Repairs
Front suspensionMounting - front sub frame - front · page 2 of 2
Refit
- Position mounting to subframe, fit bolt through subframe and mounting.
- Fit and tighten bolts securing rear subframe mounting and cross brace to body to 45 Nm.
- Fit nut securing mounting to subframe, tighten nut and bolt to 100 Nm.
- Fit and tighten bolt securing cross brace to centre mounting to 45 Nm.
- Remove stand(s) and lower vehicle.
Parts & tools for this job For 2002 MG TF
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: MG TF 2002 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.