MA - Maintenance: CHASSIS AND BODY MAINTENANCE - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › MA - Maintenance: CHASSIS AND BODY MAINTENANCE - Nissan 200SX S12 Workshop Manual
MA - Maintenance: CHASSIS AND BODY MAINTENANCE
CHASSIS AND BODY MAINTENANCE
J Checking Front Wheel Alignment (Cont'd)
Measure toe-in,
‘2.
FRONT WHEEL TURNING ANGLE
Lines paras co © Rotate steering wheel all the way right and conte lina of body left; measure turning angle an inner wheel,
Tosin=A-B Torin = 28 SMatza Foont ° Towin:
0.5 to 1.5 mm {-0.020 10 0.059 in) - ~2' to 8! (Total tov-in} Maier Turning engle: Full turns 9, Tos-in can be adjusted by varying the length Inside of steering tie-rods, 36° - 39° ‘Outside 30° - 33° Tos-out turn (Inside/Outside): 20°/18"4; © If it is not within specification, check rack stroke. Refer to section ST, Rack stroke “2 " Unit: mm fin) R245 PR24SA Pinion gear side 76(2.99) | 57 (2.24) swara7a, “(A" standard dimension: Opposite pinion gear side | 76(2.99) | 70(2.76) VR24S 36,1. mm (1.421 in) PR24SA 42.7 mm (1.681 in) \" Lock plate ack
Housing
Tiewod inner
ball joint
ssTz14 esrae1a
MA-25
Parts & tools for this job For Nissan 200SX
- PARTOil filterSearch: Nissan 200SX oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Nissan 200SX engine oil
As an Amazon Associate we earn from qualifying purchases.