MA - Maintenance: ENGINE MAINTENANCE - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › MA - Maintenance: ENGINE MAINTENANCE - Nissan 200SX S12 Workshop Manual
MA - Maintenance: ENGINE MAINTENANCE
ENGINE MAINTENANCE
Checking Exhaust Gas Sensor
Preparation When checking exhaust gas sensor, make sure that the following are in good order. © Battery © Engine oil and coolant levels © E.F.IVE.C.CS, components © E.F.L/E.C.C.S. harness and connectors © Hoses
* Oil filler cap and oil level gauge
=
Checking procedure
a
Scart engine end warm up angine until waterig a aenperature inalcatar points to the middle ot guuse.
lun engine at ebout 2,000 rpm for about 2 minutes under no-load
Tee
se ot
Make sure that inspection lamp (Graan than 8 times during 10 seconde, at 2,000 fom under no-oed, Red” *Graen SE F706 Ox. NG.
END CCheck and adjustment should be made by referring to Exhaust Gas Sensor of Section EF REC.
MA-16
Parts & tools for this job For Nissan 200SX
- PARTEngine gasket setSearch: Nissan 200SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.