Workshop Manuals Factory service & repair Nissan and Datsun
01 Nissan-S110 S12 S13 S14 S15 Silvia 200SX 240SX02 INDEX03 GI - General Information04 MA - Maintenance05 EM - Engine Mechanical06 LC - Engine Lubrication & Cooling07 EF&EC - Fuel & Emission Control08 FE - Engine Control, Fuel & Exaust09 CL - Clutch10 MT - Manual Transmission11 AT - Automatic Transmission12 PD - Propeller Shaft & Differential13 FA - Front Axle & Suspension14 RA - Rear Axle & Suspension15 BR - Brake System16 ST - Steering System17 BF - Body18 HA - Heater & Air Conditioner19 EL - Electrical System20 Inch/Metric Converion Tables21 Quick Reference Chart
Nissan and Datsun Nissan 200SX S12 1986 Workshop Manual04 · MA - Maintenance
04 · Maintenance

MA - Maintenance: CHASSIS AND BODY MAINTENANCE - Nissan 200SX S12 Workshop Manual

Make
Nissan and Datsun
Model
200SX Nissan 200SX S12 1986 Workshop Manual
Section
General › MA - Maintenance: CHASSIS AND BODY MAINTENANCE - Nissan 200SX S12 Workshop Manual
MA - MaintenanceMA - Maintenance: CHASSIS AND BODY MAINTENANCE - Nissan 200SX S12 Workshop Manual

MA - Maintenance: CHASSIS AND BODY MAINTENANCE

CHASSIS AND BODY MAINTENANCE

Tire Replacement.

(2) Slightiy pull the wheel back to properly

* gaiaeold ‘mixed use of different types of tires,

ign the nuts with bolt holes in the wheel,

such ss bies, bias belted and radial tires under

and tighten the nuts as much as possible je ny clecumatanees, with your fingers, When replacing @ tire, use a tire of the same ©

Do not use tires and wheels other than those ¢ recommended. ‘Align nuts with bolt holes Do not mix tires of different brands or tread @ ‘whee! and avanty tighten ach one alittle ec «time, patterns. When replacing standard tires with those tires © recommended size and of ‘of an optional

different diameter, the speedometer must be

recalibrated. To install wheel, tighten wheel nuts in criss- ‘@ cross fashion. mao

(3) Tighten wheel nuts evenly with a wheel wrench in criss-cross fashion, Be sure to check the wheel nuts for tightness, after the aluminum wheel has been run for the first 1,000 km (600 miles) (also in case of repeiring flat tires, tire rotation, atc.}. Replace if necessary,

smassoa,

© To install an aluminum wheel, proceed as follows: (1) Snugly tighten all nuts after the wheel is positioned.

[Semrmtene marta

swaczo,

MA-31

Parts & tools for this job For Nissan 200SX

As an Amazon Associate we earn from qualifying purchases.