MA - Maintenance: ENGINE MAINTENANCE - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › MA - Maintenance: ENGINE MAINTENANCE - Nissan 200SX S12 Workshop Manual
MA - Maintenance: ENGINE MAINTENANCE
r
ENGINE MAINTENANCE
ee Changing Engine Oil and Oil Filter Puk the vehicle on a level surface and apply the
5. Wipe oil filter mounting surface. paving brake.
6. Smear a little engine oil on rubber gasket of
1. Warm up engine, then stop it, and check for
oil filter. : oil leakage from engine components. Remove oil filler cap and drain oil, 2,
WARNING: Be careful not to burn yoursalf, as the engine oil may bs hot,
On it Open
smaoro
7. Install oil filter, Screw it on until a slight resistance is felt, then tighten an additional 2/3 turn.
8. Add recommended engine oil. omaonan, Oil capacity (refill)
3.2 liter (3-3/8 US qt, 2-7/8 Imp qt)
3. Clean and install oil pan drain plug with (Without oil filter} washer.
3.6 liter (3-7/8 US qt, 3-1/8 Imp at) 1: Drain plug (With oil filter) 29-39 Num (3.0- 4,0 kgm, 22 - 29 ftb) 4, Remove oil filter. When removing and installing oil filter, use a tool.
SM ASIA,
Parts & tools for this job For Nissan 200SX
- PARTEngine gasket setSearch: Nissan 200SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.