MA - Maintenance: ENGINE MAINTENANCE - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › MA - Maintenance: ENGINE MAINTENANCE - Nissan 200SX S12 Workshop Manual
MA - Maintenance: ENGINE MAINTENANCE
ENGINE MAINTENANCE
Checking and Replacing ____ (Contd) Spark Plugs
— Changing Engine Oil and Oil Fitter___
1, Disconnect ignition wires from spark plugs by
9. Check oil level. pulling on the boots. Do not pull on the wires. 10, Start engine and check ares sround drain plug and oll filter for any sign of oil leakage. ox, NS. 11, Run engine for a few minutes, then tum it off. Alter several minutes, check oil level.
*. r\ \\ smaor7 Remove spark plugs with a suitable spark plug
2. level afi ol 20 "H'" wrench, a not overt Wrench with a magnat to hole spark plug SMAOBBA
seNas4a
swagasa
3. After cleaning spark plugs, inspect insulator for cracks or chips, gasket for damage or deterio- ration and electrode for weer and burns. If they are excessively worn, replace with new spark plugs.
MA-12
Parts & tools for this job For Nissan 200SX
- PARTEngine gasket setSearch: Nissan 200SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.