Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)10 · Engine management system - MEMS
10 · Engine

Spark plugs - ’K8’

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Spark plugs - ’K8’
Engine management system - MEMSSpark plugs - ’K8’

SPARK PLUGS - ’K8’

Service repair no - 18.20.02

Remove

Spark plugs - ’k8’ – Service repair no - 18.20.02
  1. Disconnect h.t. leads from spark plugs.
Spark plugs - ’k8’ – Disconnect h.t. leads from spark plugs.
  1. Using a 16 mm spark plug socket, remove 4 spark plugs.

Refit

  1. Fit terminals to new spark plugs.
Spark plugs - ’k8’ – Fit terminals to new spark plugs.
  1. Set gap of each spark plug to 0.85 mm.
  2. Fit spark plugs and tighten to 27 Nm.
  3. Connect h.t. leads to spark plugs.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.