seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Tightening torques: Lights, lamps and interior switches > < Headlight range control regulatorE102 and switch and instrument illumination regulatorE20
Removing and installing trailer detector control unitJ345
Removing and installing trailer detector control unit -J345-
Removal:
   
–  Switch off ignition and all electrical consumers and take out ignition key.
t  Installation location: The control unit for the trailer detection is located on the left side of the luggage compartment behind the side trim.
–  Remove luggage compartment side trim (left-side) → Rep. gr.70.
–  Unplug electrical connectors -1- and -2-.
–  Unclip trailer detector control unit -J345- from bracket -arrows-.
Installation
Installation is carried out in reverse order, noting the following:
–  Install luggage compartment side trim (left-side) → Rep. gr.70.
  A96-0465

Tightening torques: Lights, lamps and interior switches > < Headlight range control regulatorE102 and switch and instrument illumination regulatorE20