14.INSTALL SUPPLY PUMP ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 14.INSTALL SUPPLY PUMP ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
14.INSTALL SUPPLY PUMP ASSEMBLY

22100
14.INSTALL SUPPLY PUMP ASSEMBLY
NOTICE:

*A w/ DPF *B w/o DPF
Do not hold the supply pump assembly by the parts indicated by the arrows in the illustration.
a. Install a new O-ring to the supply pump assembly.
b. Install the supply pump assembly with the 3 nuts to the timing chain case assembly. Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
c. w/ DPF: Install the No. 1 fuel pump bracket with the 2 bolts to the cylinder block sub-assembly and supply pump assembly. Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
13559
15.INSTALL NO. 1 CHAIN TENSIONER SLIPPER
a. Install the No. 1 chain tensioner slipper to the straight pin.
13561
16.TEMPORARILY INSTALL NO. 1 CHAIN VIBRATION DAMPER
a. Temporarily install the No. 1 chain vibration damper with the bolt to the cylinder block sub-assembly.
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.